Licensed: Suffolk HI-63634 · Nassau 157661Open 24 hours · Free estimates · Call or text (516) 390-8891
The Egress Experts
New window well under vinyl siding with a clear cover and brown frame on a gravel bed
Service area · Nassau County

Egress Windows in Glen Cove

Get My Free Estimate

In Glen Cove the egress window permit comes from the City of Glen Cove Building Department at City Hall, 9 Glen Street, (516) 676-2000, not from a town. The City lists finishing basements and structural changes as permit work, and installed egress windows start at $5,900 with a masonry well.

  • Egress Windows From $5,900
  • Most Installs in One Day
  • Licensed in Nassau and Suffolk
  • Free Onsite Estimate

Get a Price for Your Basement

Tell us about your basement and we will get back to you to set up a free onsite estimate.

Egress windows from $5,900, entrances from $12,000. See your price

Nassau County

City of Glen Cove at a Glance

Who issues the permit, what the town says about basement apartments, and where the building department is. The sources are listed under the table.

City of Glen CoveNassau County
Building departmentCity of Glen Cove Building Department
City Hall, 9 Glen Street, Glen Cove, NY 11542
(516) 676-2000
Egress window permitThe City lists finishing basements and structural changes as permit work: "if it involves structural changes, it requires a permit." Unpermitted work has to be disclosed when you sell, and legalizing it takes an architect or engineer, a permit and an inspection.
Basement apartmentsCheck with the town. The City's building page does not address accessory apartments. A 2017 regional report listed Glen Cove as not permitting them, but we have not confirmed the current city code, so ask the Building Department.

Sources: City of Glen Cove, Building Department; Accessory dwelling units on Long Island, St. Joseph's College and Home Remedies report, 2017

Working with the Glen Cove Building Department

Glen Cove isn’t part of any town. It’s one of Long Island’s two cities, alongside Long Beach, and it runs its own Building Department.

That matters for one practical reason: forms, fees and inspection scheduling all come from the City. Advice you read about Oyster Bay’s permit portal or zoning districts doesn’t apply here. The egress windows in Nassau County page explains the split.

City of Glen Cove Building Department
Where City Hall, 9 Glen Street, Glen Cove
Main line (516) 676-2000
Director (516) 676-4448
Email buildingdepartment@glencoveny.gov

What the City Counts as Permit Work

The City’s building page is unusually plain about it. Its list of work that needs a permit includes “Finishing basements,” “Interior work involving structural changes,” and “Roofing, siding, and replacement windows.” Its rule of thumb: “if it involves structural changes, it requires a permit.”

An egress window is a structural change to the foundation, and it’s often part of a basement finish, so it lands on that list twice. Even a replacement window needs a permit in Glen Cove, by the City’s own description. The fee schedule took effect March 18, 2025 and is posted as a PDF on the City’s page. We don’t quote fees, because they change.

If the window is one piece of a full basement finish, both scopes are on the City’s permit list. Ask the department whether it wants them on one application or two before anything is drawn, since the answer shapes the plans.

Sliding egress window in a yellow basement wall with fresh patching around the opening
Fresh patching around the opening, ready for paint.

Selling a House with an Old Egress Window

The City says sellers must disclose unpermitted work, and that legalizing it takes an architect or engineer, a permit and an inspection. If a previous owner cut a basement opening without a permit, that’s the route. Sometimes the existing opening is fine and only needs the paperwork. Sometimes it’s too small or the sill is too high, and it has to be enlarged to meet the current NY code minimums: 5.7 sq ft of net clear opening (5.0 only for a grade-floor opening), 24 inches high, 20 inches wide, sill at 44 inches or lower. We can measure it and tell you which.

Egress casement windows open in an unfinished basement utility room

Basement Apartments: Unconfirmed

We haven’t found Glen Cove’s current rule. The City’s building page doesn’t mention accessory apartments, and a 2017 regional report listed Glen Cove as not permitting them. Nine years is a long time in Long Island zoning, so treat that as a starting point and ask the Building Department. The basement apartment rules by town page will be updated once we confirm it.

Crew member measuring a deep square dig beside a basement window and a stone patio
Checking the depth of the dig.

The Work Itself

On egress window install day we cut the opening, set the window, dig and install a well at least 36 inches out from the wall, and clean up. Most egress window installs take one day, and the wall or the weather can add time. We’ll give you the schedule with your quote. Pick the well and the starting price follows: $5,900 installed with masonry, $6,500 with Boman Kemp galvanized steel, or $8,900 with Cambridge ArmorTec block up to 40 inches deep, plus $1,100 per extra 12 inches (egress window prices on Long Island). A basement entrance runs $12,000 to $15,000.

We’re licensed in Nassau County under 157661. Call (516) 390-8891 or get a starting price.

Two crew members digging beside a house to reach the basement wall for an egress window
FAQ

Questions We Get Asked

Don't see your question? Call or text (516) 390-8891 and ask us.

Is Glen Cove part of the Town of Oyster Bay?

No. Glen Cove is a city with its own Building Department at City Hall, 9 Glen Street, so you don't file with Oyster Bay or North Hempstead. Oyster Bay's zoning districts, including its RNG and RSC basement rule, don't apply inside the city. Call the City at (516) 676-2000 for its forms and fee schedule.

Can I legalize an old basement egress window in Glen Cove?

Yes, through the City. Its Building Department says legalizing unpermitted work takes an architect or engineer, a permit and an inspection. Sellers must also disclose unpermitted work, so it's easier to fix before a sale. If the old opening is too small for R319, it gets enlarged as part of the same permit.

Does Glen Cove allow basement apartments?

We haven't confirmed it. The City's building page doesn't address accessory apartments, and a 2017 regional report listed Glen Cove as not permitting them. That's nine years old, so ask the Building Department before planning one. A basement bedroom for your own household is a separate question that needs an egress window and a permit.

Does Glen Cove need a permit for a replacement basement window?

The City's own list of permit work includes replacement windows, along with finishing basements and interior work involving structural changes. So even swapping a window in an existing opening goes through the Building Department in Glen Cove. A new or enlarged egress opening is structural on top of that, which puts it on the list twice.

Find Out What Your Window Will Cost

Pick your well type to see the starting price, or call or text to book a free onsite estimate.